Implant Dentist - Serving Stonehouse, Stroud, Gloucester and Cheltenham in Gloucestershire

Implants are small cylinders of titanium, which effectively replace the root of a tooth when placed in the jaw bone. A crown, bridge or denture is then attached to the implant resulting in a stable, natural looking replacement for any missing teeth. This is the preferred treatment option for replacing missing teeth or rigidly fixing loose full dentures and in the long-term is very cost-effective.

In order to achieve the best result for you our dentists and other members of staff will spend time with you to assess your individual requirements, to fully discuss your options and to provide you with a comprehensive treatment plan. X-rays may be taken (using our on-site digital equipment) and models of your teeth may be made to assist the dentist and our dental technician in providing you with the best possible treatment plan and final result.

We use both the Straumann and Ankylos implant systems, both of which have a long track record of success and have produced excellent cosmetic results for our dental implant patients in Stroud and Stonehouse.

An implant is a screw-shaped attachment made from titanium, which is inserted into the jawbone to replace the root portion of a missing natural tooth. It is placed into a pre-drilled socket in the bone and then acts to support a crown or bridge, or securely hold a denture in place.

It integrates readily with the bone by a process called osseointegration, after which time the crown, bridge or denture can be placed onto an abutment that is fixed into the top of the implant.

 

Routine dental implants are placed by the following process:

1. Assessment and treatment planning – a thorough examination and discussion will lead to a treatment plan being formulated, including covering all other options available to replace the missing teeth. A written plan and cost estimate will then be provided.

2. Implant placement – this is the surgical procedure to place the implant into the bone in the desired position. It is carried out using local anaesthetic to ensure no discomfort is experienced.

3. Healing period – this is to allow the implant to integrate successfully and firmly with the bone. In most cases this takes about 8 weeks but will depend on individual circumstances.

4. Restoration phase – this is the placement of the crown, bridge or denture onto the implants once healing is complete.

5. Maintenance – good oral hygiene is important for preserving implants, and patients also need to regularly attend for review appointments following completion of treatment.

Routine treatment usually takes about 12 weeks to complete, but more complex cases can take longer. The expected duration of any treatment will be fully explained in the written plan.

 

Dental implants can either replace single missing teeth using implant-supported crowns, or multiple teeth using implant-supported bridges or dentures.

All the teeth can be replaced by either a removable denture, which is firmly anchored onto implants and can be removed for cleaning, or implant-retained fixed bridgework which cannot be removed by the patient.

 

Implants act to replace natural teeth both aesthetically and functionally as closely as possible, without damaging other healthy teeth.

They can replace a single tooth, multiple missing teeth, or support a removable denture with fixed teeth or act to secure a denture into place, giving patients more confidence.

 

They can be used on any adult, at any age, as long as jaw growth is complete. The basic requirements for treatment include a good general state of health, good oral hygiene and adequate bone quantity and quality.

Some patients may have existing conditions that can adversely influence the success of any implant treatment, including smoking and periodontitis (gum disease).

 

There are a number of methods that can be used to replace teeth during treatment. These include providing a removable plastic denture or a fixed adhesive bridge.

To ensure they do not apply potentially damaging pressure to the underlying implants during the healing phase, these temporary teeth often have to be adjusted during treatment.

 

The dental implant is inserted into the bone under local anaesthetic so that there is no discomfort during treatment. Painkillers and antibiotics are given before treatment and provided afterwards, although there is usually very little discomfort after surgery.

 

Keeping the implants clean during and after treatment is very important. Instructions will be given and techniques demonstrated to enable thorough cleaning before, during and after treatment.

You will need different cleaning aids and regular review appointments to ensure you are maintaining good oral hygiene.

 

It is important to continue to see your dentist and hygienist for regular check-ups to monitor and maintain your dental health and hygiene.

Regular review appointments will be made to continually assess the status of your dental implant.

 

Assessment of the quality, quantity and location of available bone is usually carried out by visual and physical examination, specific dental radiographs (x-rays) to provide a two-dimensional image, and study models of the teeth. Sometimes however, these processes do not provide enough information and a three-dimensional image is required using a CT scan.

If not enough bone is present then a number of options are available to try and provide extra bone. This can be collected from a number of different areas in the mouth. Alternatively a technique called guided bone regeneration (GBR) may be suitable. This uses artificial bone and a membrane to serve as a template to aid bone formation in the required area.

If there is not enough bone present in the premolar and molar regions of the upper jaw, then it may be possible to make room using a sinus lift procedure. A sinus is an air-filled cavity on either side of your nose, and this can be accessed by a surgical procedure inside the mouth, and bone or bone substitute added to make more room for implants to be placed.

 

Missing teeth can also be replaced by using fixed bridges or removable dentures without implants. Each option depends on the number and location of teeth that are absent.

Fixed conventional bridges without implants are supported by natural teeth on either side of a gap. These supporting teeth would have to be filed down. Crowns are created for these prepared teeth, with a false tooth attached between the crowns and the bridge is then cemented on. These bridges can be used to replace more than one missing tooth, but may then require support from more natural teeth.

Fixed resin-bonded bridges consist of a metal framework with wings on one or both sides that are bonded onto the back of the existing teeth, with the false teeth also bonded onto this metal structure. The supporting teeth therefore do not need to be filed down and only require minimal preparation. The bridge is however, only as strong as the bond created, and may not be so successful in areas of the mouth with high biting forces.

Both of these bridge types can have a number of different designs, including being used as a cantilever, where only one tooth acts to support the false tooth.

Where there are a larger number or all of the teeth are missing, removable dentures can be used to replace them. These can be made of acrylic (plastic) or be metal-based. They can use clasps or retainers to gain support from any remaining teeth.